CLASS RULES – Kyosho Pro

Back

Class Rules – Kyosho Pro

ChassisKyosho Fazer Mk.2 Ready To Run 4WD models.
Kyosho Fazer Mk.2 Chassis Kit – Part No. 34461.
Note: Short wheel base recommended to fit aftermarket bodies
Motor & ElectronicsHobbywing Xerun XR10 Juststock G3S esc and Justock G2.1 10.5t motor – PN: HW38020370
(Reverse Must be turned off )
No Gyros or Electronic Driver Aids are permitted!
Body ShellKit body or any 190mm touring car, or 2 door GT body.
Body may be painted in any scheme.
TyresKit tyres and wheels or any 24mm on-road rubber tyres. Slicks and treaded tyres are permitted
Tyre cleaner permitted.
Tyre warmers NOT permitted.
Tyre additive permitted.
Tyres must be a minimum of 28 shore hardness.
Hop UpsCar to be “Out Of The Box” except as follows-
FA552 Brake callipers may be removed.
Shock oil may be changed.
Diffs to remain as kit supplied – grease or silicone diff oil may be used.
The following upgrade parts are permitted
Kyosho short driveshaft – FAW202
Aluminium Centre Driveshaft – FAW209
Steel replacement balls for front hubs – FAW219
HD Centre Shaft Cup (F) – FAW211
HD Centre Shaft Cup (R) – FAW212
Aluminium Motor Mount – FAW217
Sway Bar Kit – FAW208
Kyosho TC Spring Set – FAW224
 
Maverick diff gears are interchangeable with Kyosho Part KYO-VS002B and may be used – they do require a small modification to the chassis – MV150142
No other Option part or hop up may be used
BatteriesAny full sized 2 cell Hard-cased 7.4v Lipo. (No shorty packs)
Bullet type connectors or hardwired battery packs are permitted.
GearingAs per kit, 68T Spur – Kyosho FA556-68 TC Spur Gear 68T.
Pinion size is open.
Factory Kyosho plastic motor mount or FAW217 must be retained.
WeightMinimum 1500 grams ready to run including transponder.