CLASS RULES – ITSC JUNIOR SPORTSMAN

For Sanctioned Event or full rule set, please visit RCRA EP On Road Rules

Class Rules – ITSC Junior Sportsman

ChassisTwo-wheel drive to front or rear wheels or four-wheel drive is allowed. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint, eg: dog bone/s or universal joint/s in its driveshaft. Drive train and suspension design is free from restriction. Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The Chassis must not be shaped to gain an aerodynamic advantage. In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.
MotorHobbywing Xerun Justock G2 21.5T.
Part Number = HWA30408007 or XY309960  (XRS Version).
No motor modifications are allowed.
ESCHobbywing Xerun XR10 Justock. Part Number = HW30112000 ( Recommended )
Any Non Boosted ESC on RCRA Blinky List
Body Shell4 door sedan style bodies that are currently on the IFMAR, EFRA or ROAR body listings, and fit within the GLOBAL BODY SPECIFICATIONS for electric touring cars.
TyresRubber tyres only (24mm)
Hop UpsAny hop up available from any manufacturer.
BatteriesAny 2 cell Hard-cased approved 7.4 Lipo packs as listed on the ROAR or EFRA websites.
GearingGearing is set no less to 3.8 final drive ratio (FDR)
WeightMinimum 1320 grams ready to run including transponder.