CLASS RULES – 17.5t Blinky TC

Chassis	1/10th Scale Four-wheel drive is allowed. Chassis must have independent suspension on all four wheels. Each driven wheel must have a flexible joint, eg: dog bone/s or universal joint/s in its driveshaft. Drive train and suspension design is free from restriction. Flat Pan (1/12th and 1/10th Track Style) chassis are not allowed. The Chassis must not be shaped to gain an aerodynamic advantage. In principle the underside of the chassis must be flat and parallel to the ground along the entire length of the body-shell. Aerodynamic shaped parts (splitters/diffusers/tunnels/etc) may not be fitted to the chassis.
Motor	Any 17.5T Brushless Motor on IFMAR, ROAR, EFRA or BRCA list
ESC	Speed Controllers as per RCRA, ROAR or BRCA list. Speed controllers eligible for Stock classes must provide zero timing advance, along with disabling advanced motor control functions (i.e. Boost, Cheat Mode, Turbo, etc). When the “0 Boost” profile is enabled, it shall be indicated by a blinking LED while the ESC is armed and in neutral position.
Body Shell	As per ITSC 1:10 Touring Car: 4 door sedan style bodies are allowed that are currently on the IFMAR, EFRA or ROAR body listings, and fit within the GLOBAL BODY SPECIFICATIONS for electric touring cars.
Tyres	Any brand Rubber touring car tyres. (24mm)
Hop Ups	Any hop up available from any manufacturer.
Batteries	Any 2 cell Hard-cased approved 7.4 Lipo packs as listed on the ROAR or EFRA websites.
Gearing	Gearing is not restricted.
Weight	Minimum 1320 grams ready to run including transponder.