Class Rules – TCR
Chassis | Any FWD, full independent suspension chassis. Dimensions and specs as per RCRA ISTC Guidelines. |
Motor / ESC Combo | Hobbywing XR10 Justock 13.5 combo. Motor: Justock 3650 G2.1 13.5 (legacy G2 variant also legal) ESC: Xerun XR10 Justock G3 (legacy non-G3 variant also legal) ESC motor/battery wires may be replaced, max 14awg. |
Body Shells | Eligible bodies are reasonable scale representations of any existing ‘B/C-Segment’ Front Wheel Drive Sedan/Hatchback/Wagon with a minimum allowable roof height of 125mm measured at the highest point of the roofline (vertical elements will be ignored). Wings must be as supplied with the original body and must be painted, not clear. |
Wheels / Tyres | Wheels must have spokes/holes as manufactured, no solid flat disc faced rims. Tyres are rubber only, open compound, open inserts. Slicks and treaded tyres are both legal. Dimensions and specs as per RCRA ISTC guidelines. |
Batteries | Any 2 cell Hard-cased approved 7.4 Lipo packs as listed on the ROAR or EFRA websites. |
Gearing | Gearing is not restricted. |
Weight | Minimum 1250 grams ready to run including transponder. |